The DNT22 from Lectrosonics is a two input, two output Dante-based interface, and a convenient way to add up to two channels of Dante audio to an existing Dante-based networked audio system. The unit's small form factor and PoE power capability make it easy to put Dante connectivity wherever it's needed without the need for costly and interference prone analog wiring.
Main Benefits
- Add 2 I/O Channels to Dante Audio System
- Small Form Factor
- 3 Input Gains
- 24V Phantom Power per Channel
- Consumer and Pro Line Level Outputs
- Dual Power (DC or PoE)
Description
- Small form factor, can be unobtrusively located near analog sources or sinks
- Dual power (DC or PoE) means the DIO2x2 will work in systems with either standard or PoE Ethernet switches
- Three input gains accommodate common line levels, phantom power and dynamic mics
- +24V Phantom power per channel - powers virtually all types of phantom powered microphones typically used in installed AV systems
- Two analog output gains to accommodate both consumer and pro line level requirements without overload
The DNT22 I/O Interface is a 2in/2out, cost-effective way to add up to two channels (in and out) of Dante™ audio to an existing Dante-based networked audio system. The DNT22’s small form factor and PoE power capability make it easy to put Dante connectivity wherever it’s needed - near the audio source or sink thereby eliminating costly and interference prone analog wiring.
POWER SUPPLY NOT INCLUDED!
Lectrosonics CH20 can be purchased separately to go with this item.
Tech Specs
| Analog Input |
Balanced and RF filtered 3-pin depluggable microphone/line |
| Input Impedance |
>1.8 kΩ @ any gain setting |
| Maximum Input Level |
+8 dBu @ 0.0 dB gain
-16 dBu @ +25 dB gain
-31 dBu @ +40 dB gain |
| Input Gain |
0, +25, +40 dB, software selectable |
| Analog Output |
Balanced line level with automatic muting on loss of Dante signal |
| Output Impedance |
200 Ω balanced, 100 Ω unbalanced |
| Output Gain |
0.0 or +10 dB, software selectable |
| Maximum Output Level |
+12 dBu |
| Noise |
EIN: 115 dBu @ +40 dB gain
Output: |
| THD |
<0.01% @ any gain, input signal 3 dB below maximum |
| Phantom Power |
+24V, software selectable |
| Network Connection |
Dante/PoE: 100 Base-T Dante Ethernet |
| Compliance |
PoE Class 0 802.3af PoE PD compliant |
| Certification |
FCC Part 15 Class A, CE |
| Environmental |
32 to 104°F (0 to 40°C) |
| Power Requirements |
+12 VDC, 500 mA
DC power not required if used with a PoE Ethernet switch |
| Dimensions (WxDxH) |
6.5 x 3.5 x 1.1" (165 x 89 x 28 mm) |
