Product Code: 086003
The Modular Windshield WS 2 Kit is suitable for small diaphragm condenser microphones from 121mm up to 160mm in length with a 19-25mm diameter and a 3-Pin XLR connection.
Main Benefits:
- Flexible, complete windshield and suspension package, which provides varying levels of windshielding for numerous microphone configurations
- The iconic Windshield Kit is the industry standard, and leads the way in windshielding and suspension technology
Description
The Modular Windshield Kit is the professionals' choice when maximum isolation from wind and handling noise is required.
This complete modular system can be configured to allow almost any microphone to be shock-mounted and provided with varying degrees of windshielding. Components may be ordered separately, or as one of a series of kits, which simplify the selection process for many common configurations.A Modular Windshield Kit is comprised of the following three main components: Modular Suspension, Modular Windshield and Windjammer.
Modular Suspension
Our suspensions provides complete isolation against handling noise and cable-borne noises, by supporting the microphone in a cradle arrangement using Lyre suspension webs.
Windshield
The Windshield basket completely surrounds the microphone and its connector, sliding onto the Modular Suspension to provide up to 30dB of wind noise attenuation. This is the first layer of windshielding protection for your microphone.
Windjammer
The Windjammer introduced by Rycote in 1985, is high quality synthetic fur covers, designed to fit perfectly over the Modular Windshield. It gives an additional 20dB of wind noise attenuation. Fitted with a drawstring & toggle to allow snug and easy fitting. Modular Windshield Kits, including zipped Windjammer are also available on request.
Tech Specs
Windshield Body Length: 210 mm
Total Windshield Length: 320 mm (includes the End Caps)
Height of Windshield: 100mm
Windjammer Fur Length: 40mm
Windjammer Fur Colour: Grey
Microphone Connector: XLR-3F
Max Wind-noise Attenuation: 50 dB
Finding the correct Windshield Kit will depend on the type, length and diameter of the microphone.
Because the whole microphone is encased in a windshield basket the total length of the microphone including the XLR cable must be accounted for, this means adding 50mm to the length of the mic.
For a windshield to work effectively the microphone should be mounted centrally within the windshield, therefore the microphone + XLR length should approximately equal the windshield body length. The body length of our windshields is the total length, excluding end caps.
Compatibility
| AKG C391 B |
Modular studio condenser microphone system including a cardioid capsule. Its application range shall include lecterns, places of wors... |
| AKG CK 1 451 |
The classic cardioid capsule for the CMS range. The pattern was remarkably consistent across the frequency range. The 1S had a rising... |
| AKG CK 1 460 |
A remote cardioid capsule introduced for use with the C 460 B preamplifier. |
| AKG CK 91 SE300 B |
The flat frequency response and uniform polar pattern of the CK 91 make it ideal for general applications where suppression of off-ax... |
| AKG CK 92 SE300 B |
The CK 92 offers exceptionally neutral presentation of a source in its ambient sound field, providing uniform results regardless of t... |
| AKG CK 93 SE300 B |
Similar to the CK 91, the CK 93 provides additional attenuation of 90 degree off-axis sounds. In addition to a higher ratio of direct... |
| Audio-Technica AT 4021 |
Ideal for critical studio and live applications, the low-profile AT4021 offers a flat, extended frequency response, high maximum SPL ... |
| Audio-Technica AT 4053a; AT 4053b |
Recommended for professional recording and critical applications in broadcast, the AT4053a has a direct-coupled, balanced output, whi... |
| Audio-Technica ATM 33a |
Ideal for acoustic guitar, percussion, overheads, vocals and more, the ATM33a excels in both studio and stage applications. It offers... |
| BeyerDynamic M 160 |
Double ribbon dynamic microphone with unique acoustic characteristics, especially suitable for use when recording digitally. |
| BeyerDynamic M 201 |
A very sensitive dynamic microphone with an integral humbucking transformer to eliminate mains-borne interference when working near c... |
| BeyerDynamic MC 713 |
For more information on this specific microphone, go to the BeyerDynamic website at http://europe.beyerdynamic.com. |
| BeyerDynamic MC 723 |
For more information on this specific microphone, go to the BeyerDynamic website at http://europe.beyerdynamic.com. |
| DPA 4006 |
The 4006 is phantom powered, which, together with its extended range of acoustic pressure equalisers and different protection grids, ... |
| DPA 4017C |
Setting new standards for compactness within shotgun microphones and their applications, the modular 4017C is an exceptionally short ... |
| Schoeps CMC Series |
For more information on this specific microphone, go to Schoeps website at http://www.schoeps.de/en/home |
| Sennheiser MKH 20 |
An RF condenser microphone using a symmetrical capsule. It has a transformerless, fully-floating balanced output, switched pre-attenu... |
| Sennheiser MKH 30 |
An RF condenser microphone using a symmetrical capsule. It has a transformerless, fully-floating balanced output. Switchable pre-atte... |
| Sennheiser MKH 40 |
An RF condenser microphone using a symmetrical capsule. It has a transformerless, fully floating balanced output. There are switches ... |
| Sennheiser MKH 50 |
An RF condenser microphone using a symmetrical capsule. It has a transformerless, fully floating balanced output, switchable bass rol... |
Contents
|
|
1 x Suspension Medium (XLR-3F) 62
Product Code: 040142
Suitable for small diaphragm condensers in a WS2 |
|
|
1 x Connbox CB1 (XLR-3F)
Product Code: 016901
Suitable for mono microphones with 3-pin XLR. |
|
|
1 x Windjammer WJ 2
Product Code: 021502
Suitable for use with the Windshield 2 |
|
|
1 x Windshield WS 2
Product Code: 010602
Suitable for mic lengths 121-160mm
|
|
|
1 x XLR Holder MK II
Product Code: 048493
The XLR Holder Mk II fits between any 3/8" male threaded boom pole or mic stand and any 3/8" female microphone shock-mount or windshield system
|
|
|
1 x Boom Poles Adaptor
Product Code: 048402
|
|
|
1 x Pistol Grip Handle with Lever
Product Code: 048401
|
2x Single Lyre 62 (19/25)
Brush
Hex head key
Videos
