Schoeps Mini-DA42 with breakout cable AES42 Powering Box with digital and analog outputs incl. AC-adapter
The Mini-DA42 serves for powering digital microphones (especially the SuperCMIT) and for converting their output signals to analog.
- powers digital microphones
- has both digital and analog outputs
- inputs and outputs are available through a Sub-D breakout cable
- all connectors are on the front side
Overview
It allows to operate digital microphones at devices which only offer analog inputs.
Inputs: AES42, Mode 1 (XLR-3F, 110 Ohms, black label)
Outputs (available through included Sub-D breakout cable):
– AES3 (XLR-3M, 110 Ohms, blue label)
– 2 × analog (XLR-3M, yellow and red label), balanced, referring to ground, maximum cable length: 300 m
Indicators: Green LED for power; red LED for "unlocked" (turns off when a digital microphone is connected and the circuitry of the Mini-DA42 locks on to that signal).
Power: DC 12 - 18 V / 200 - 500 mA, available through included AC adapter PSD DC with HIROSE plug.
Operation is also possible with other AC adapter models or batteries / rechargeable batteries.
Dynamic range of the Mini-DA42: 112 dB (A, RMS), >98dB (CCIR, q-peak)
Dynamic range of the SuperCMIT with the Mini-DA42: >107 dB (A, RMS), >96dB (CCIR, q-peak)
breakout cable for Mini-DA42
Specifications
| Technical specifications |
| Sampling rate |
192 kHz max. |
| Dynamic range |
112 dB (A, RMS), >98 dB (CCIR, q-peak) |
| Frequency range |
2 Hz - 20 kHz (-1 dB) |
| THD+N |
-95 dB @ 1 kHz |
| Sensitivity |
typ. 140mV/Pa at the analogue outputs measured with SuperCMIT2U |
| Max. output level |
14.5 dBU @ 0 dBFS |
| Current consumption |
200 mA (SuperCMIT included) |
| Dimensions |
84 × 84 × 34 |
| Weight |
173 g (6.1 oz) |
