Product Code: 107308
A three-sided, white, triangular mic flag, suitable for microphone with 19 to 38 mm diameters.
Main Benefits:
- Fits A Wide Range Of Microphones
- Lightweight But Tough
Description
Rycote's Mic Flags are made from durable shatterproof moulded plastic and avoid the use of perishable foam inserts to make the flags fit the microphone. Instead, an array of internally fitted hard-wearing red and black rubber 'vanes' secures the flag around the microphone, allowing Rycote’s Mic Flags to be used with any microphones ranging from 19 to 38mm in diameter.
Fits A Wide Range Of Microphones
With all of the black and red ‘vanes’ fitted, the Rycote mic flag will securely hold microphones from 19 to 32mm wide. To fit the flags to mics of up to 38mm in diameter, users simply remove the lid of the mic flag and slide out the black vanes, creating a looser fit which allows the broader mics to slide onto the flag.
Lightweight But Tough
Lightweight and extremely hard-wearing, Rycote's Mic Flags provide a large printable area for sponsors' logos. Three- and four-sided flags are available, in either black or white; the square type offers a printable logo area 57mm wide by 48mm high on each of its four sides, while the printable area of the three sides on the triangular flag measure 89.5mm wide by 48mm.
If you want your branding seen on screen, use Rycote’s Mic Flags!
Tech Specs
Mic Flag - Triangular
A three-sided triangular mic flag, suitable for microphone with 19 to 38 mm diameters. The outer casing is made from a shatter-proof plastic designed to allow perfect display of branding logos. In contrast to all other mic flags, the Rycote mic flag does not use foam to hold the microphone. Instead the mic flag can grip microphones from 19 to 38 mm diameter, with removable rubber "vanes". The mic flags are available in black or white, either in single or multi-packs (5 pcs/pack).
For mics, ø19.0 mm (ø 3/4") to ø32.0 mm (ø 1-1/4") - all vanes fitted
For mics, ø32.0 mm (ø 1-1/4") to ø38.0 mm (ø 1-1/4") - remove every other vane*
Specifications
Dimensions: 95 mm wide faced triangle x H 55 mm
Weight : 87 grams (3 oz)
Printable Area for label: 3 sides of W 89.5 x H 48.0 mm
Compatibility
| Audio-Technica AT 8004 |
Ideal for interviews, sports-casting and as the 'mono' mic when used in conjunction with a stereo microphone, the AT804 has a rugged ... |
| BeyerDynamic M 58 |
Designed for ENG location work, with an extra long handle and a Nextel non-reflective finish. |
| BeyerDynamic MCE 58 |
High output level microphone for location recording, allowing direct connection to portable DAT and MiniDisc recorders. The XLR is wi... |
| Electrovoice 635 N/D |
Neodymium magnet version of the 635 'hammer'. |
| Electrovoice RE 50 |
A well-known omni microphone for broadcast use. The RE50 is exceptionally well shock-isolated and very robust. |
| Sennheiser MD 46 |
Designed for audio journalists and field reporters, the Sennheiser MD 46 offers a host of advantages. Its extended frequency response... |
| Sennheiser MKH 20 |
An RF condenser microphone using a symmetrical capsule. It has a transformerless, fully-floating balanced output, switched pre-attenu... |
| Sennheiser MKH 70 |
An RF condenser microphone using a symmetrical capsule. It has a transformerless, fully floating balanced output and switchable pre-a... |
| Sennheiser SKM with Evolution or Neumann KK capsules |
The SKM and Evolution series handheld microphones and capsules have all been created in the best tradition of German engineering and ... |
| Shure SM 58 |
Unidirectional dynamic vocal microphone designed for use in sound reinforcement and studio recording. The SM58S variation comes with ... |
Product Variations
| Part No. |
Name |
| 107301 |
Single Square Mic Flag (Black) |
| |
A four-sided square mic flag, suitable for microphones with 19 to 38 mm diameters. |
| 107302 |
Single Triangular Mic Flag (Black) |
| |
A three-sided triangular mic flag, suitable for microphone with 19 to 38 mm diameters.. |
| 107307 |
Single Square Mic Flag (White) |
| |
A four-sided square mic flag, suitable for microphones with 19 to 38 mm diameters. |
| 107308 |
Single Triangular Mic Flag (White) |
| |
A three-sided triangular mic flag, suitable for microphone with 19 to 38 mm diameters. |
| 107303 |
16 X Single Square Mic Flag (Black) |
| |
Multiple of 16 square black Mic Flag. |
| 107305 |
16 X Single Square Mic Flag (White) |
| |
Multiple of 16 square white Mic Flag. |
| 107304 |
16 X Single Triangular Mic Flag (Black) |
| |
Multiple of 16 triangular black Mic Flag. |
| 107306 |
16 X Single Triangular Mic Flag (White) |
| |
Multiple of 16 triangular white Mic Flag. |
| 107309 |
4 x Each Single Mic Flag - BLK SQ, WHT SQ, BLK TRI, WHT TRI |
| |
Multiple of 4 triangular white, 4 triangular black, 4 square black, 4 square white |
Printing
Orders for printed flags can only be accepted in writing or via email. Artwork to be supplied in high resolution (300+ dpi) print ready tiff, eps or pdf file format. Artwork must include Pantone® references or CMYK separations. There are no limits regarding the number of colours presented in the logo and no difference in price either. Due to the nature of the printing process it is not possible to reproduce fine details such as gradients and shading.
We, however reserve the right to approve or reject the quality of the artwork provided before printing.
The branding is achieved by using high quality laminated vinyl that replicates the Pantone/ CMYK code as closely as possible.
Print cost only for Single Triangular, White Mic Flag* ,
Order code: 107313
|
Print cost only for Single Square, Black Mic Flag* ,
Order code: 107310
|
Print cost only for Single Triangular, Black Mic Flag* ,
Order code: 107311
|
Print cost only for Single Square, White Mic Flag* ,
Order code: 107312
|
*Mic Flag not included
