Schoeps CMC 1 U

Name: Schoeps CMC 1 U
Brand: Schoeps
SKU: S132011
Price: 684.00 EUR
Availability: InStock
Rating: 4.85713 (35 reviews)

-46,00 € discount
~~730,00 €~~ (~~927,10 €~~ incl. VAT)
684,00 €
(868,68 € incl. VAT)

available: on stock

–

Add to cart

The CMC 1 is a new, small Colette microphone amplifier, about one-third the size and 40% lighter than the CMC 6. It is compatible with all components of the Colette system and can be used in place of the CMC 6 without compromise, for all applications in which the size and weight of the microphone play a role.

Main Benefits

Complete alternative to the renowned CMC 6
Fully compatible with all existing MK capsules and Colette active accessories such as the CUT 60 and RC tubes
Suitable mounting accessories are already available, such as the CINELA E-OSIX-CMC1U and the Rycote INV-6 elastic suspensions.
High maximum SPL: 135 dB-SPL with the MK 4 (0.5% THD or less)
Very low current consumption: 2.0 mA at 48 Volts
Operates on 48 V or 12 V phantom power
Very high immunity from RF interference with the SCHOEPS RFI Shield

Description

At SCHOEPS, “uncompromising miniaturization” means that the electrical characteristics of the CMC 1 are equal to, or even better than, those of the CMC 6. Through modern electronic design, these outstanding electrical properties have been achieved:

High maximum SPL: 135 dB-SPL with the MK 4 (0.5% THD or less)
Very low current consumption: 2.0 mA at 48 Volts
Operates on 48 V or 12 V phantom power
Very high immunity from RF interference with the SCHOEPS RFI Shield

Tech Specs

Frequency range	20 Hz-20 kHz
Sensitivity	see corresponding capsule
Maximum output voltage	1,8 V (5 dbV) with 1 kΩ load
Maximum sound pressure level (THD < 0.5 %)	135 dB-SPL (P48) with MK 4 131 dB-SPL (P12) with MK 4
Low cut filter	20 Hz, 12 dB/oct
Output impedance	50 Ω +/- 1 Ω (8 Hz - 50 kHz)
Minimum recommended load impedance	1 kΩ
Common mode rejection ratio (at 1 kHz)	> 55 dB
Maximum cable length	> 400 m / ~1300 ft
SCHOEPS RFI Shield	Yes
Powering standard / Valid range	P48 / 30-52 V P12 / 11-13 V
Current consumption	2 mA (P48) 3 mA (P12)
Output	XLR-3M, analog, 1 channel
Length	39 mm / ~1.5"
Diameter	20 mm / 0.8"
Weight	36 g / 1.3 oz
Surface finish	matte gray (g) or custom color

Application

Alignment of vertical capsules with the CMC 1/6:

The CMC 1 U can be used in many suspensions (e.g. OSIX) that have a rigid orientation of the XLR connector and thus the amplifier. Also in the compatible MS and dual MS setups (for example, Cyclone), the alignment is fixed. As a result, the microphone cannot be rotated arbitrarily in such a suspension. For axially aligned capsules like the MK 4 this is not important, but a vertical capsule like the MK 8 has to be aligned radially.

In such cases, this accessory helps:

No. 800540: O-ring for radial alignment of a MK capsule. This O-ring is placed on the thread of the amplifier and makes the MK capsule permanently stable in any orientation. The O-ring is included with the MK 8 and all other vertical capsules (MK 4V, 41V) and can also be ordered separately.

Related products

Cinela E-OSIX CMC1-H Shockmount for CMC 1 U (HARD version, not suited without CUT 60 or windshield)

schCinela E-OSIX CMC1-H Shockmount for CMC 1 U (HARD version, not suited without CUT 60 or windshield) Hard elastic suspensions for CMC 1 U with the

230,00 €
(292,10 € incl. VAT)

1 item in stock Add to cart

Schoeps CMC 1 K

CMC 1 K MICROPHONE AMPLIFIER The CMC 1 K is identical to the CMC 1 U, but instead of a built-in XLR connector, it has an attached 5-meter (16.5') ca

796,00 €
(1.010,92 € incl. VAT)

Add to cart

Schoeps CMD 42 digital microphone amplifier

Features digital microphone amplifier for the Colette series, compatible with all MK capsules and Colette accessories AES42 interface, Modes 1

1.103,00 €
(1.400,81 € incl. VAT)

Add to cart

Schoeps CMC 1 L

MICROPHONE AMPLIFIER The CMC 1 L is identical to the CMC 1 U, but instead of a built-in XLR connector, it has LEMO The CMC 1 L is our new, small

796,00 €
(1.010,92 € incl. VAT)

Add to cart

Cinela E-OSIX CMC1-S Shockmount for CMC 1 U (SOFT version, not suited for CUT 60 or heavy windshield)

Cinela E-OSIX CMC1-S Shockmount for CMC 1 U (SOFT version, not suited for CUT 60 or heavy windshield) Soft elastic suspensions for CMC 1 U with the m

230,00 €
(292,10 € incl. VAT)

No stock

Schoeps KMIT microphone capsule with interference tube

Microphone capsule with interference tube. Set includes KMIT blue with gradient to nextel gray, W 140 blue, Rose Mic Tube 120 {tab=Features} S

-6% discount
~~1.339,00 €~~ (~~1.700,53 €~~ incl. VAT)
1.258,66 €
(1.598,50 € incl. VAT)

Add to cart

CMC 1
RFI Shield Tech Note on the RFI Shielding (Protection from RF interferences) in SCHOEPS microphones Hans Riekehof, 2017 Articles
Which suspension fits my SCHOEPS microphone? updated 09.09.2019 User Brochures
Which windscreen fits my SCHOEPS microphone? updated 09.09.2019 User Brochures

Shop Cart Module

Schoeps CMC 1 U

Main Benefits

Description

Tech Specs

Application

Videos

Downloads

Related products

TakeOne
I used to be awaiting for this small gem, so I replaced all my cmc6 amps

Login Form

Shop Cart Module

Schoeps CMC 1 U

Main Benefits

Related products